Most of time I use smart cutter in my destop(Win 7 X64 sp1) to cut DVB Records TS files,it work well. And now I try to use smart cutter in my workstation(Win2008 R2 sp1),but when I output the 1080i TS file，It crash. And when I output the 720P TS file it work well. Then I reinstall my workstation to WIN7 sp1 X64,problem still happen. I try to update the Driect X and FFDshow, it also has no use.
the server report the error code:c0000005.
Is smart cutter support Win2008 server R2?
Re: Is smart cutter support Win2008 server R2?
Dear qiujiange:
Thanks for your message.
Smart Cutter does support Win 2008.
Please follow below steps to see whether it helps.
1.download the most updated portable version of Smart Cutter.
http://www.fame-ring.com/smart.cutter.rar
2.decompress it to a directory, say C:\FameRing, but not C:\Program Files this time. Keep these default settings and run.
Are you using Nvidia/Geforce display card?
If so, this may help:
solution from Arthur:
Here's my tip and it did work for me.
1 - No offence with fame-ring.com but this program Smart Cutter is not really optimized with Windows 7 64-bit OS it seems to have a memory management problem. So here what I did that works. The shortcut created by the program - Right-click, Properties, go to Compatibility tab and check Run this program in compatibility mode for Windows XP (Service Pack3) and you don't have to check any other options and apply. - That's it!
2 - For users with anti-virus program problems - Right-click on Computers and Advance System Settings, under Advance tab and Performance click Settings, Data Execution Prevention tab then select Turn on DEP for all programs and services except those I select. Click Add and select the Smart-Cutter program and Apply then Ok. A restart of your computer is a must so it will take effect the DEP instruction.
And a similar approach from Flemming:
I did found a solution there will work with both 1.3.1 and 1.3.2...
Just run the program in compability mode and set it to Windows XP SP3
Problem solved even with preview enabled...
http://www.fame-ring.com/forum/viewtopic.php?f=7&t=147
http://www.fame-ring.com/forum/viewtopic.php?f=7&t=165
Please feel free to send us your further advice and suggestion.
Thank you very much.
Best Regards,
FameRing Support Team
Thanks for your message.
Smart Cutter does support Win 2008.
Please follow below steps to see whether it helps.
1.download the most updated portable version of Smart Cutter.
http://www.fame-ring.com/smart.cutter.rar
2.decompress it to a directory, say C:\FameRing, but not C:\Program Files this time. Keep these default settings and run.
Are you using Nvidia/Geforce display card?
If so, this may help:
solution from Arthur:
Here's my tip and it did work for me.
1 - No offence with fame-ring.com but this program Smart Cutter is not really optimized with Windows 7 64-bit OS it seems to have a memory management problem. So here what I did that works. The shortcut created by the program - Right-click, Properties, go to Compatibility tab and check Run this program in compatibility mode for Windows XP (Service Pack3) and you don't have to check any other options and apply. - That's it!
2 - For users with anti-virus program problems - Right-click on Computers and Advance System Settings, under Advance tab and Performance click Settings, Data Execution Prevention tab then select Turn on DEP for all programs and services except those I select. Click Add and select the Smart-Cutter program and Apply then Ok. A restart of your computer is a must so it will take effect the DEP instruction.
And a similar approach from Flemming:
I did found a solution there will work with both 1.3.1 and 1.3.2...
Just run the program in compability mode and set it to Windows XP SP3
Problem solved even with preview enabled...
http://www.fame-ring.com/forum/viewtopic.php?f=7&t=147
http://www.fame-ring.com/forum/viewtopic.php?f=7&t=165
Please feel free to send us your further advice and suggestion.
Thank you very much.
Best Regards,
FameRing Support Team