Dear iHD:
We are tuning the parameters to generate different results:
http://www.fame-ring.com/samples/iHD/iHD.131.ts
http://www.fame-ring.com/samples/iHD/iHD.new.ts
Could you please test the two files on your end and tell us the result?
Thank you so much.
Best Regards,
FameRing Support Team
Transparent square during playback
Re: Transparent square during playback
Both are exist the transparent square.
As my mentioned last time, parameters "Format settings, GOP : M=3, N=12" is missed.
Can I add it manually by modify the file?
iHD.131.ts
Video
ID : 821 (0x335)
Menu ID : 82 (0x52)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L3.0
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : 27
Duration : 57s 719ms
Bit rate mode : Variable
Bit rate : 3 531 Kbps
Maximum bit rate : 15.0 Mbps
Width : 720 pixels
Height : 576 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Standard : PAL
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : MBAFF
Bits/(Pixel*Frame) : 0.341
Stream size : 24.3 MiB (82%)
Color primaries : BT.470-6 System B, BT.470-6 System G, BT.601-6 625, BT.1358 625, BT.1700 625 PAL, BT.1700 625 SECAM
Transfer characteristics : BT.470-6 System B, BT.470-6 System G
Matrix coefficients : BT.470-6 System B, BT.470-6 System G, BT.601-6 625, BT.1358 625, BT.1700 625 PAL, BT.1700 625 SECAM, IEC 61966-2-4 601
iHD.new.ts
Video
ID : 821 (0x335)
Menu ID : 82 (0x52)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L3.0
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : 27
Duration : 57s 719ms
Bit rate mode : Variable
Bit rate : 3 531 Kbps
Maximum bit rate : 15.0 Mbps
Width : 720 pixels
Height : 576 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Standard : PAL
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : MBAFF
Bits/(Pixel*Frame) : 0.341
Stream size : 24.3 MiB (82%)
Color primaries : BT.470-6 System B, BT.470-6 System G, BT.601-6 625, BT.1358 625, BT.1700 625 PAL, BT.1700 625 SECAM
Transfer characteristics : BT.470-6 System B, BT.470-6 System G
Matrix coefficients : BT.470-6 System B, BT.470-6 System G, BT.601-6 625, BT.1358 625, BT.1700 625 PAL, BT.1700 625 SECAM, IEC 61966-2-4 601
As my mentioned last time, parameters "Format settings, GOP : M=3, N=12" is missed.
Can I add it manually by modify the file?
iHD.131.ts
Video
ID : 821 (0x335)
Menu ID : 82 (0x52)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L3.0
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : 27
Duration : 57s 719ms
Bit rate mode : Variable
Bit rate : 3 531 Kbps
Maximum bit rate : 15.0 Mbps
Width : 720 pixels
Height : 576 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Standard : PAL
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : MBAFF
Bits/(Pixel*Frame) : 0.341
Stream size : 24.3 MiB (82%)
Color primaries : BT.470-6 System B, BT.470-6 System G, BT.601-6 625, BT.1358 625, BT.1700 625 PAL, BT.1700 625 SECAM
Transfer characteristics : BT.470-6 System B, BT.470-6 System G
Matrix coefficients : BT.470-6 System B, BT.470-6 System G, BT.601-6 625, BT.1358 625, BT.1700 625 PAL, BT.1700 625 SECAM, IEC 61966-2-4 601
iHD.new.ts
Video
ID : 821 (0x335)
Menu ID : 82 (0x52)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L3.0
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : 27
Duration : 57s 719ms
Bit rate mode : Variable
Bit rate : 3 531 Kbps
Maximum bit rate : 15.0 Mbps
Width : 720 pixels
Height : 576 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Standard : PAL
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : MBAFF
Bits/(Pixel*Frame) : 0.341
Stream size : 24.3 MiB (82%)
Color primaries : BT.470-6 System B, BT.470-6 System G, BT.601-6 625, BT.1358 625, BT.1700 625 PAL, BT.1700 625 SECAM
Transfer characteristics : BT.470-6 System B, BT.470-6 System G
Matrix coefficients : BT.470-6 System B, BT.470-6 System G, BT.601-6 625, BT.1358 625, BT.1700 625 PAL, BT.1700 625 SECAM, IEC 61966-2-4 601
Re: Transparent square during playback
Dear iHD:
Sorry for the latency.
Here we received from our developers a new video result
http://www.fame-ring.com/samples/iHD/iHD.enc.ts
Could you please test it on your end and tell us the result?
Thank you very much.
Best Regards,
FameRing Support Team
Sorry for the latency.
We do not think so. This parameter's meaning is not very clear.iHD wrote:Both are exist the transparent square.
As my mentioned last time, parameters "Format settings, GOP : M=3, N=12" is missed.
Can I add it manually by modify the file?
Here we received from our developers a new video result
http://www.fame-ring.com/samples/iHD/iHD.enc.ts
Could you please test it on your end and tell us the result?
Thank you very much.
Best Regards,
FameRing Support Team
Re: Transparent square during playback
No problem with iHD.enc.ts.admin wrote:Dear iHD:
Sorry for the latency.We do not think so. This parameter's meaning is not very clear.iHD wrote:Both are exist the transparent square.
As my mentioned last time, parameters "Format settings, GOP : M=3, N=12" is missed.
Can I add it manually by modify the file?
Here we received from our developers a new video result
http://www.fame-ring.com/samples/iHD/iHD.enc.ts
Could you please test it on your end and tell us the result?
Thank you very much.
Best Regards,
FameRing Support Team
Just the aspect ratio not correct.
Re: Transparent square during playback
Seem the problem have not fixed in version 1.3.3
Re: Transparent square during playback
Dear iHD:iHD wrote:Seem the problem have not fixed in version 1.3.3
Sorry for the latency.
It looks the problem is related to the duration of the re-encoding parts.
Our developers are still investigating several similar issues.
We will keep you posted about the progress.
And we may perhaps need your further help.
Please feel free to send us your further advice and suggestion.
Thank you very much.
Best Regards,
FameRing Support Team
Re: Transparent square during playback
Hi Admin,
is there any update progress for this issue?
I still encountered this problem in the new version
is there any update progress for this issue?
I still encountered this problem in the new version
Re: Transparent square during playback
like only add a "pre ts" in first file start ,or the h264 encode is not work fine..
include powerdvd ,have or not have dxva..
include powerdvd ,have or not have dxva..
Re: Transparent square during playback
Dear iHD:
Sorry for the latency.
Here we received from our developers a new video result
http://www.fame-ring.com/samples/iHD/iHD.cut.ts
Could you please test it on your end and tell us the result?
Thank you very much.
Best Regards,
FameRing Support Team
Sorry for the latency.
Here we received from our developers a new video result
http://www.fame-ring.com/samples/iHD/iHD.cut.ts
Could you please test it on your end and tell us the result?
Thank you very much.
Best Regards,
FameRing Support Team